The TOTAL TWP7150026 Sewage Submersible Pump is a heavy-duty 1500W / 2HP dirty-water pump designed for sewage, wastewater, drainage and dewatering applications.

It features a strong stainless-steel pump body, cast-iron motor housing, a built-in cutting blade and a high maximum flow of 350 litres per minute, making it suitable for construction sites, septic systems, flooded areas, farms and other demanding dirty-water jobs. TOTAL’s own product listing confirms the 1500W / 2HP specification, 14.5m head and 350L/min flow rate.

💧 Key Features

• ⚡ 1500W / 2HP motor
• 💧 Maximum flow rate: 350L/min
• 📏 Maximum head: 14.5 metres
• 🔩 2-inch outlet
• 🌊 Designed for dirty water and sewage
• 🔪 Built-in cutting blade
• 🧱 Stainless-steel pump body
• ⚙️ Cast-iron motor body
• 🔌 220–240V, 50Hz
• 🔋 Copper-wire motor
• 📏 9-metre power cable
• 🛡️ Control box included for protection
• 🏗️ Suitable for construction and drainage work
• 🚰 Ideal for wastewater and sewage transfer
• 📦 Supplied in a wooden box

🌊 Built for Dirty Water

Unlike ordinary clean-water submersible pumps, the TWP7150026 is designed specifically for sewage and dirty-water applications.

The built-in cutting blade helps deal with fibrous and soft waste that could otherwise clog a normal drainage pump.

It is suitable for:

• 🚽 Sewage and wastewater pumping
• 🕳️ Septic and drainage systems
• 🏗️ Construction-site dewatering
• 🌧️ Flood-water removal
• 🚜 Farm drainage
• 🏭 Workshop and commercial wastewater
• 💦 Sumps and collection pits

💦 High Flow Performance

With a maximum flow rate of 350L/min, the pump can move a large amount of water quickly.

That is equivalent to approximately 21,000 litres per hour under low-head conditions.

Actual flow will reduce as vertical lift and pipe resistance increase.

📏 14.5-Metre Maximum Head

The pump can push water against a total head of up to 14.5 metres, making it suitable for drainage and wastewater applications where water needs to be lifted from pits, tanks or low-lying areas.

🔪 Built-In Cutting Blade

One of the most useful features of the TWP7150026 is its integrated cutting blade.

This helps reduce clogging when pumping wastewater containing soft fibrous material, making the pump better suited to sewage applications than a standard clean-water pump.

✅ Benefits

• Powerful 2HP motor
• High 350L/min flow
• Built for dirty water
• Integrated cutting blade
• 2-inch discharge
• Stainless-steel pump body
• Durable cast-iron motor section
• Long 9m cable
• Control box included
• Suitable for heavy-duty drainage work

⚠️ Installation & Operating Notes

• 💧 Keep the pump properly submerged during operation
• 🚫 Do not run the pump dry
• 🌍 Ensure proper electrical earthing
• 🛡️ Use the supplied protection/control equipment
• 🔩 Use the correct 2-inch discharge hose or pipe
• 🧹 Avoid very large hard solids that exceed the pump’s cutting capability
• 🔧 Professional installation is recommended for sewage systems
• ⚡ Disconnect power before servicing or clearing blockages